Power Equipment Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi all hope someone can help with this. I have a 1kw submersible well pump that supplier an acumilator tank to around 4 bar and has a 10 m head.
I want to run it from solar but need much lower load ie 200 Watts would be ideal. I have searched for a reasonable priced pump to do this without success. Is there any way to reduce the full load of the existing pump using some sort of dimmer device, it does not mater if flow rate drops and or preasure as its just filling a 1000 litre tank it can take 6 hours if need be.
I have such a device on a 2kw heater that effectively reduces it to 400w.
Or any other low cost solution

Regards
David
 
1 - 1 of 1 Posts
Top