Power Equipment Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have purchased the above generator to use and I am hooking to a 3 to 5 psi system, do I need to convert to 1/2 psi?
 

·
Registered
Joined
·
808 Posts
you need a regulator that will deal with the 3-5 psi at the btu rated for the generator down to the pressure the generator needs.
a one inch npt unit should work fine.
make sure of the pressure with a gauge before you connect with the generator.
 
1 - 4 of 4 Posts
Top