Pole Pruning Saw
Join the discussion
Recommended Reading
-
Chain Saw ForumI am looking for a source of parts for restoring my 1968 Husqvarna A77 chainsaw. I need bearings and seals and would be interested in a flywheel and piston/rings/cylinder. Any old NOS or compatible parts people have a line on any of these parts?
- 7
- 174
-
Chain Saw ForumMy Echo 330T has developed a problem of having way to much resistance pull starting. It feels as if it has way too much compression or perhaps something is in the cylinder that shouldn't be. If I remove the sparkplug I cannot see any evidence of oil or fuel in the cylinder. All looks clean and...
- 8
- 338
-
Chain Saw ForumJust sold my old one and looking to replace it with the above model. Thoughts...? Dutchy
- 5
- 240
-
Dutchy491 · updated
-
Chain Saw ForumMy Stihl MS310 chainsaw was in the shop (a place that sells and works on Stihl saws) about 6 months ago with starting problems. The carb was replaced with new OEM carb and the it has started and ran fine since then - except 3 days ago when it wouldn't even fire. I checked the ignition spark...
- 5
- 433
-
Chain Saw ForumI have a Stihl MS 180 C chainsaw. This machine has worked flawlessly for the last three and a half years. Than in July 2015 it refused to start. I mean that I turned it off for a minute and it has never run again. Following info from the internet I put on a new carb, no change. I really like...
- 3
- 1K
Join now to ask and comment!