I just got an old sears air compressor or at least i think it is. It has a 30 gal. devilbiss tank rated at 150 psi dated 1979. There is no motor on it, so i'm looking to find out what pump is on it and what size motor i can use to get it working again.Hope i explained this good enough to understand. Thanks and hope someone can help me out
Old sears devilbiss 30 gal needs motor
Join the discussion
Recommended Reading
-
Air Compressor ForumLooking for safety advice for a CO2 capture and release project. So, there's a greenhouse with a few propane heaters that run at night, during the winter. I want to capture CO2 from the exhaust of these heaters with an air compressor, then release it during the day to enrich CO2 levels. My...
- 0
- 25
-
co2compressor? · updated
-
Air Compressor ForumHi all. I’m new here and joined mostly because I want to organize my sir compressor in my shop. I’ve seen several kits online and they appear the same. The two that look the best (and the same) are Rapidair and Primefit. Primefit is sold by Home Depot so I’m leaning in that direction. Does...
- 1
- 51
-
Air Compressor ForumHowdy, looking for a parts book for a Kaeser SX7 screw compressor. Part# 100707.00010. Any help is appreciated, thanks.
- 1
- 50
-
Air Compressor ForumI recently acquired an air compressor and have been trying to restore it, I believe its a Cosmo air 2 horse mini. It's missing the outlet pipes and gauges, which I have found, however they all seem to be ones that screw on and this compressor only has an odd sized, male, quick release component...
- 0
- 109
-
Elessar_ · updated
-
Air Compressor ForumI picked up this air compressor for the workshop. Gave it a service, done the belt, filter, oil and drain. I can't find any info on the web for this unit. The fill hole and dipstick for the crank oil is around the other side. Is this an oil reserve for the bearing or a crank vent?
- 5
- 144
-
buzzawak · updated
Join now to ask and comment!