Power Equipment Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Hi,

We have experienced a strange event where our TEM evo parameters are found to be different then what we set up an year ago...The site was offline for a year and now the parameters are found to be different...Is it possible that TEM can loose the set parameters by itself? I am sure that the parameters are not part of the PLC memory.. where are the TEM parameters saved?

Please let us know if any of you have encountered a similar situation. Our generator unit MWM TCG2020V12 runnig on sewerage gas.

Thanks,
Zohair
 

·
Registered
Joined
·
12 Posts
Discussion Starter · #3 ·
No, we haven't.
Also, would like to understand some of the parameters..
Would you know what does the following parameters refer to and what should be the appropriate value for it:
1. 12060 Gas type A (currently turned off) - contractor think it should be ON
2. 12061 Gas type B (currently turned off)
3. 15020 Option NOx
4. 12080. CH4:CH4-value (currently set at 1) - contractor wants to change it to 0
5. 21331 ZA control of ignition energy min. ignition energy (currently turned off) - contractor think it should be ON
6. 21332 ZA control of ignition energy max. ignition energy (currently turned off) - contractor think it should be ON
7. 21330 ZA Control of ignition energy target value (currently turned off) - contractor think it should be ON
8. 11620 Power reduction due to AKR adjustment (currently turned off) - contractor think it should be ON
9. 11621 Power reduction due to AKR adjustment: limit value (currently turned off) - contractor think it should be ON
10. 21360 Balancing amplifying factor (currently turned off) - contractor think it should be ON
11. 21361 Balancing reset time (currently turned off) - contractor think it should be ON
12. 21362 Balancing max. adjustment late (currently turned off) - contractor think it should be ON
13. 21363 Balancing max. adjustment early (currently turned off) - contractor think it should be ON
14. 21364 Balancing conversion ignition timing / temperature (currently turned off) - contractor think it should be ON
15. 21365 Balancing scatter bandwidth (currently turned off) - contractor think it should be ON
 
1 - 3 of 3 Posts
Top