Joined
·
611 Posts
anyone ever watch the lumberjack competitions on tv i had seen them a few years ago and all i can say is wow those guys are good with a saw. and some of the saws that they use are huge.
lumberjack competitions
1 - 3 of 3 Posts
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Chain Saw ForumJust sold my old one and looking to replace it with the above model. Thoughts...? Dutchy
- 6
- 264
-
Dutchy491 · updated
-
Chain Saw ForumI am looking for a source of parts for restoring my 1968 Husqvarna A77 chainsaw. I need bearings and seals and would be interested in a flywheel and piston/rings/cylinder. Any old NOS or compatible parts people have a line on any of these parts?
- 7
- 182
-
Chain Saw ForumMy Echo 330T has developed a problem of having way to much resistance pull starting. It feels as if it has way too much compression or perhaps something is in the cylinder that shouldn't be. If I remove the sparkplug I cannot see any evidence of oil or fuel in the cylinder. All looks clean and...
- 8
- 346
-
Chain Saw ForumMy Stihl MS310 chainsaw was in the shop (a place that sells and works on Stihl saws) about 6 months ago with starting problems. The carb was replaced with new OEM carb and the it has started and ran fine since then - except 3 days ago when it wouldn't even fire. I checked the ignition spark...
- 5
- 436
-
Chain Saw ForumI have a Stihl MS 180 C chainsaw. This machine has worked flawlessly for the last three and a half years. Than in July 2015 it refused to start. I mean that I turned it off for a minute and it has never run again. Following info from the internet I put on a new carb, no change. I really like...
- 3
- 1K
Join now to ask and comment!