Power Equipment Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Have an old home made log splitter that has been dormant for several years. The Old Briggs fired up no problem & I split 5-6 logs everything was fine....Several days later I noticed the ram was extended about 8 inches I went to start the motor & it was locked, as with the handle to move the ram forward & backwards. I took a log & gently whacked the handle & freed it up...I heard some gurgling in the oil reserve tank, but the pump will not turn...I put a pipe wrench on the shaft still won't move.....Stopped..... looking for advise....Would appreciate any help Thanks
 

·
Registered
Joined
·
3 Posts
Discussion Starter #2
Harris....Problem is the log splitter is locked up & cannot start it......Got the pump off it & need to take it apart and check for anything unusual.....Thanks for your reply.....
 
1 - 2 of 2 Posts
Top