Power Equipment Forum banner
21 - 23 of 23 Posts

·
Registered
Joined
·
1,171 Posts
Disassembly often makes the obscure clear... Congratulations!
 

·
Registered
Joined
·
4,135 Posts
you might want to dielectric grease every plug connection in the gen set...
it is a good thing!

in other brands i have seen under crimped harness issues!
I had another one of those today!
it had been to 4 other shops....
i found it in 10 min of checking harness with a test light.
that is the only thing i like about a test light ... it loads the wiring a bit.
 

·
Registered
Joined
·
1 Posts
Aloha!
So, this course of action led to a successful resolve.
Behind the Remote Start plug in, I found a bit of corrosion on the Brown/Blue terminal, 12VDC positive. Pulled it apart cleaned completely, recrimped with DiaElectric grease applied. Put it back together. iMonitor came on, and KeySwitch and Push Start work perfectly. No die outs, after 1-1/2 hour run. I'll be putting it back in service later today!
I really appreciate all the expertise!
Thank You!
jACK
I'm having the same problem. Thanks a bunch guys, not I know how to fix it myself. My local shop says 6 to 10 weeks after dropping off the unit to them, absurd!
 
21 - 23 of 23 Posts
Top