Power Equipment Forum banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 · (Edited)
Hi all,

Does anyone own a recent Hitachi cordless power tool which uses the Hitachi UC18YKL battery charger?

Either Li-ion, Ni-MH or Ni-Cd. From 7.2v up to 18v.

The charger opens very easily by removing three screws from the base.

I need to know the value of resistor number R11 on the circuit board. The number may be hidden under the silicon. For those who don't know, this resistor is a light-grey cylindrical object about half an inch long (12mm) with 4 different colored rings, the last of which is gold colored.
The resistor is located at 10 O'clock, in relation to the battery connector contacts and directly between small blue capacitor C10 and square resistor VR1.

If you cannot read it's value, then a photo would be great.

But you can read it from here...
Resistor color code calculator - 3, 4 and 5 band resistors

I am enclosing photo's of my unit with the damaged resistor.

Any help would be marvelous...



1 - 1 of 1 Posts