Power Equipment Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have toro t1200 gen. it reads 210vac and 32vdc when running. volt checks at brushes is 4.8v and 5.2 at L1 toL2. this is with avr unhooked. when hooked up is 4.8 v.to brushes. when I put 12adc to brushes the out put is normal 125vac and 18vdc. does this sound like a bad avr. the gen. is a sawafuji model se1241t.
thanks hunterjo
 
1 - 1 of 1 Posts
Top