Help ID old Ingersoll Rand compressor
Join the discussion
Recommended Reading
-
Air Compressor ForumI picked up this air compressor for the workshop. Gave it a service, done the belt, filter, oil and drain. I can't find any info on the web for this unit. The fill hole and dipstick for the crank oil is around the other side. Is this an oil reserve for the bearing or a crank vent?
- 5
- 92
-
buzzawak · updated
-
Air Compressor ForumJust got a model 25-HU. Does anyone have a source to replace the pump's pistons? I got it seized and worked the pistons loose. I removed the cylinders and they are not smooth so I wonder if there is some compressor piston that would fit if i have the cylinders machined OS. I'm tempted to free...
- 1
- 89
-
Uncle_Joe · updated
-
Air Compressor ForumNew to this forum. I recently picked up an old Montgomery Ward air compressor which has had both the electrical motor and compressor pump replaced at some time. I am looking fir help identifying the pump so I can order repair parts. Attached are photos of the pump. Cannot find any name tag...
- 0
- 141
-
Air Compressor ForumI have a kobalt 8Gal1.8hp hotdog air compressor that is technically oiless; however, I just moved and the movers shipped it either upside down or on its side and it's covered in oil. I don't see any cracks or where the oil came from within the compressor. Do I need to add more oil to it somehow...
- 7
- 152
-
Matthew.tatar · updated
-
Air Compressor ForumHello, can someone tell me why my PCL air coupler is leaking air? Its not leaking from the threads as im using teflon tape and its sealed right however i am getting a big air leak at the connection where you connect the coupler too.. heres a picture .. I will admit the 1/4 male coupler and 1/4...
- 3
- 117
-
Hassy7861 · updated
Join now to ask and comment!