Power Equipment Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1 (Edited)
Has anyone in their life ever seen a pump with an extended crankshaft for PTO/accessory drive? I can’t find one anywhere.

It runs an alternator and blower motor/oil pump off the end of the pump, which is why I can’t replace with a normal pump.

I really only need a new piston but I’ll go for a new pump at this point since I’ve tried literally every place and can’t find someone willing to help me find a piston.

Appreciate all input.







 

·
Registered
Joined
·
1,462 Posts
snap a few good pix of that aluminum pump housing.
there might be a few clues on mfg there.
click here fo the power washer page with mfg links
there are links for the big 3 in the washer pumps..
you might call the mfg's and send over a pix to them!
and a few vendor links on that page too.

I looked and did not see it..
it maybe a one off custom made for that washer !!
however the fins and end cap where the pto shaft sticks out are close to other brands!
 
1 - 2 of 2 Posts
Top