Power Equipment Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Here is my proposed compressor pipe setup. Let me know if you guys have any thoughts on this. I have the compressor and hose reel already installed. I've also elected to go with 3/4 inch black pipe.

Some info:
General use - blow gun, basic air tools, will not run all the time
IR SS3 Compressor - 1/2 inch outlet
Air hose = 1/2 inch Dia - 50 ft.
3/4 inch black pipe main
 

Attachments

·
Registered
Joined
·
44 Posts
Here is my proposed compressor pipe setup. Let me know if you guys have any thoughts on this. I have the compressor and hose reel already installed. I've also elected to go with 3/4 inch black pipe.

Some info:
General use - blow gun, basic air tools, will not run all the time
IR SS3 Compressor - 1/2 inch outlet
Air hose = 1/2 inch Dia - 50 ft.
3/4 inch black pipe main

I my suggestion you can increase compressor outlet pipe.If right ball valve attached with bottom pipe line then it will more valuable for use. :rolleyes::rolleyes::rolleyes::rolleyes::rolleyes:
 
1 - 3 of 3 Posts
Top