Power Equipment Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
I have following doubts in the Compressed air filter element design,
Please clarify it ,

Normally the compressed air filter elements are manufactured by using the Borosilicate material. All the Manufacturer filter elements are manufactured by same material with more than 6 number of layers. The element medias are available with the micron ratings of 5 & 1 micron only. But there is no 0.01 micron media in the Glopal market.

I) is there any relationship between number of layers Vs the micron rating of the filter?.

(i)Need to know, How much amount of layers are need to achieve the 5 micron filter element (particulate)?calculation?
(ii)Need to know, How much amount of layers are need to achieve the 1 micron filter element(Coalescing)?calculation?
(iii)Need to know, How much amount of layers are need to achieve the 0.01 micron filter element(Coalescing)?calculation?
(iv)How should i select the drainage layer? Drainage layer thickness calculation
(v) Pressure drop Vs Flow calculation?
 
1 - 1 of 1 Posts
Top