I am new to this forum and I'm hoping to find some help or guidance here.
Issue- I have a PowR-Quip 7500 watt Industrial Contractor Series Vertical Generator with a 13Hp Tecumseh Motor. I was using it the other day and the voltage dropped. I searched around and learned to check the Capacitor or AVR under the cover which i did and found that there is a Capacitor under the plastic housing. I noticed immediately that the end of the capacitor was half way pushed out. The Capacitor reads as follows:
35 uF +- 5% SH
450Vac. cl.D 50Hz.
Can someone Please Help Me find the correct one to replace this with. The ones i found have multiple stake-ons which appear to be ran in series however the one on my generator only has 2 stake-ons and is not in series.
Any help would be Greatly Appreciated