Power Equipment Forum : Power Equipment Forums

Power Equipment Forum : Power Equipment Forums (https://www.powerequipmentforum.com/forum/)
-   Air Compressor Forum (https://www.powerequipmentforum.com/forum/7-air-compressor-forum/)
-   -   Air compressor oil continues to be black (https://www.powerequipmentforum.com/forum/7-air-compressor-forum/16618-air-compressor-oil-continues-black.html)

RedCurl 02-23-2017 04:53 AM

Air compressor oil continues to be black
 
I got this air compressor from my dad that passed away.
I removed the opil and as expected it was black.
So I removed the front plate (it is a single piston reciprocating compressor, probably 50 years old) and cleaned the well. I then inserted more clean transparent oil and ran the compressor for a few minutes and changed the oil. It was black. I did this 3 times and it was always black with black sediments and reducing amounts of very fine metal particles.
So I filled the compressor well with diesel fuel to rinse it...and it was black
Then I inserted turpentine (10 times) to wash it and all turp fills came out black!:tango_face_sad:
What am I doing wrong?

Romore 02-24-2017 10:21 PM

I would suspect the pump was badly overheated, the oil is burnt .

adam 03-16-2017 03:17 AM

Air compressor is old and may be its want a service. Only oil change does not solve your problem.

joyjafor 12-09-2017 08:59 AM

the compressor has been old enough and the piston and cylinder may have rusted. Change both of them. It may solve your problem.

motormonkey 12-09-2017 12:31 PM

After fifty years, a lot of gunk and crud can settle out of the oil, and this stuff can set up like concrete in the sump of the compressor. It could be that fifty years worth of gunk and crud are still in the bottom of the compressor, and your attempts at cleaning it out have only been partially successful. A little blackened oil from this is not necessarily a bad thing if that's the case.

How does the compressor work? Does it build up adequate pressure? Does it overheat? Does it have excessive drag? Any abnormal noises? If it's working okay, put fresh oil in it and run it. If it's not working okay, it's probably time to disassemble it and figure out why.

saiygen 06-17-2019 02:14 AM

This is something off topic but i need your help in regarding buying some tools for my air compressor as it stops working and i wanted to get it repair, i have PORTER-CABLE C2002-WK Oil-Free. Suggest me the tools which i will be required for repairing. I have read this guide but couldn't find anything specific.

stevon 06-18-2019 09:48 AM

oil less
 
Saiygen,

Most oil free compressors are throw away meaning they are cheaply manufactured (light duty at best) and when they break the repair cost is more in parts and labor than buying a new replacement compressor. Parts are not always available either for the same reasons. I would replace this compressor with an oil lubricated design.

Stephen

Quote:

Originally Posted by saiygen (Post 65766)
This is something off topic but i need your help in regarding buying some tools for my air compressor as it stops working and i wanted to get it repair, i have PORTER-CABLE C2002-WK Oil-Free. Suggest me the tools which i will be required for repairing. I have read this guide but couldn't find anything specific.



All times are GMT -4. The time now is 02:37 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging v3.1.0 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 
For the best viewing experience please update your browser to Google Chrome